#shedelectrique Instagram Photos & Videos

Statistics

We looked inside some of the posts tagged with #shedelectrique and here's what we found interesting.

Inside 18 Posts

Time between posts:
624 hours
Average like
23.3
Average comment
2.9
Posts with video
3/18
Posts with photo
15/18

Hashtag Popularity

@shedification Profile picture

@shedification

Just finished up this Epiphone Goth Les Paul. It was a total rework. Reattached the snapped off headstock, installed new @righteoussoundpickups 1018 Humbuckers, @stetsbar tremolo, @stringbutlerforguitarusa and a tusq nut for tuning stability. The pickups are amazing and this demo video doesn't even begin to do them justice (something I'll be working on in coming weeks, my audio situation is a mess in this room) and it doesn't help that I can barely remember the Megadeth song I'm trying to play. Either way, this was a fun and challenging project and I'm glad to see this guitar back in its owner's hands.
#shedelectrique #guitarrepair #guitarwiring #lespaul #stetsbar #righteoussoundpickups #1018 #stringbutler #ballin

Just finished up this Epiphone Goth Les Paul. It was a total rework. Reattached the snapped off headstock, installed new @righteoussoundpickups 1018 Humbuckers, @stetsbar tremolo, @stringbutlerforguitarusa and a tusq nut for tuning stability. The pickups are amazing and this demo video doesn't even begin to do them justice (something I'll be working on in coming weeks, my audio situation is a mess in this room) and it doesn't help that I can barely remember the Megadeth song I'm trying to play. Either way, this was a fun and challenging project and I'm glad to see this guitar back in its owner's hands.
#shedelectrique #guitarrepair #guitarwiring #lespaul #stetsbar #righteoussoundpickups #1018 #stringbutler #ballin
56 13 26 April, 2019
@shedification Profile picture

@shedification

My man Bret coming through for a Push/Pull, Series/Parallel tone pot install tomorrow. To say we go back a bit might be an understatement...
#guitarwork #pals #Shedelectrique

My man Bret coming through for a Push/Pull, Series/Parallel tone pot install tomorrow. To say we go back a bit might be an understatement...
#guitarwork #pals #Shedelectrique
41 10 9 February, 2019
@shedification Profile picture

@shedification

This #naughtyknottypine body just landed so we're getting her sanded. Maybe also reevaluating earlier ideas about electronics...
#shedelectrique #barncaster

This #naughtyknottypine body just landed so we're getting her sanded. Maybe also reevaluating earlier ideas about electronics...
#shedelectrique #barncaster
18 0 18 October, 2018
@shedification Profile picture

@shedification

And here she is. Prototype complete. Things I've learned from this project are:
Always use good solder, the cheap shit WILL ruin your day. (big ups to @robotdogstudio for coming through in the clutch there)
Painting is for the birds. Buy cases pre-powder coated.
Sometimes ignoring instructions yields the best results.
Decal paper is funky shit.
I'll be reaching out to everyone who was interested in one of these bad boys soon. I got a fest to get to!
#shedelectrique #eyeofprovidence #distortionpedal #buildit #paintit #decalit #playthefuckoutofit #boutiquepedalsandeffects

And here she is. Prototype complete. Things I've learned from this project are:
Always use good solder, the cheap shit WILL ruin your day. (big ups to @robotdogstudio for coming through in the clutch there) 
Painting is for the birds. Buy cases pre-powder coated.
Sometimes ignoring instructions yields the best results.
Decal paper is funky shit.
I'll be reaching out to everyone who was interested in one of these bad boys soon. I got a fest to get to!
#shedelectrique #eyeofprovidence #distortionpedal #buildit #paintit #decalit  #playthefuckoutofit #boutiquepedalsandeffects
33 2 4 May, 2018
@shedification Profile picture

@shedification

After fighting first with some very solvent heavy paint, then spray booth issues, then over sanding (d'oh!), then being unable to source a proper printer, I threw a hail mary by loading decal paper into my giant wax printer here. By some miracle it came out really nicely. Once I clear coat it you won't notice the lines any. This was my first try with #micromark decal paper. I'll use a different fixative next time. This sucker might actually make its debut at #wakingwindows this weekend. 👊🏻
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #eyeofprovidence

After fighting first with some very solvent heavy paint, then spray booth issues, then over sanding (d'oh!), then being unable to source a proper printer, I threw a hail mary by loading decal paper into my giant wax printer here. By some miracle it came out really nicely. Once I clear coat it you won't notice the lines any. This was my first try with #micromark decal paper. I'll use a different fixative next time. This sucker might actually make its debut at #wakingwindows this weekend. 👊🏻
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #eyeofprovidence
42 0 4 May, 2018
@shedification Profile picture

@shedification

What? Like you've never converted your dining room into a sketchy spray booth in order to hastily finish a pedal prototype so it's ready for the big music festival at the end of the week, before. Sheesh, Judge Judy, over here.

What? Like you've never converted your dining room into a sketchy spray booth in order to hastily finish a pedal prototype so it's ready for the big music festival at the end of the week, before. Sheesh, Judge Judy, over here.
32 6 2 May, 2018
@shedification Profile picture

@shedification

First shit coat of primer on the #Shedelectrique #eyeofprovidence, this primer is self etching and that etching is the primary focus of the first coat. This will be wet sanded prior to a second, more meticulously applied coat of primer, before several coats of final color and clear coat. Next time I'll be smart enough to order it powder coated so I can save many hours of paint and sanding. .
.
.
.
.
.
.
#diy #buildit #distortionpedal #trianglemuffclone #transistors #mamothelectronics

First shit coat of primer on the #Shedelectrique #eyeofprovidence, this primer is self etching and that etching is the primary focus of the first coat. This will be wet sanded prior to a second, more meticulously applied coat of primer, before several coats of final color and clear coat. Next time I'll be smart enough to order it powder coated so I can save many hours of paint and sanding. .
.
.
.
.
.
.
#diy #buildit #distortionpedal #trianglemuffclone #transistors #mamothelectronics
10 0 26 March, 2018
@shedification Profile picture

@shedification

Some more sweet tones from the #Shedelectrique #eyeofprovidence, the control that this thing gives over the breakup of the distortion and sustain is fucking nuts. I honestly haven't even modded this for bass and it still sings. Sorry to all the #ween fans for butchering the tune so badly.

Some more sweet tones from the #Shedelectrique #eyeofprovidence, the control that this thing gives over the breakup of the distortion and sustain is fucking nuts. I honestly haven't even modded this for bass and it still sings. Sorry to all the #ween fans for butchering the tune so badly.
42 8 18 March, 2018
@shedification Profile picture

@shedification

Finally. It lives. Just say no to bad solder, kids. Some paint and a silk screen and she's done done. Sorry about the lame video, this is obviously cell phone sound sample stuff. .
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #mammothelectronics #byoc #aluminumknobs #trianglemuffclone

Finally. It lives. Just say no to bad solder, kids. Some paint and a silk screen and she's done done. Sorry about the lame video, this is obviously cell phone sound sample stuff. .
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #mammothelectronics #byoc #aluminumknobs #trianglemuffclone
15 4 17 March, 2018
@shedification Profile picture

@shedification

Ghost switches! While it looks great, I've got a couple phantoms to work out. More work ahead... .
.
.
.
.
.
.
.
#Shedelectrique #builtup #gremlins

Ghost switches! While it looks great, I've got a couple phantoms to work out. More work ahead... .
.
.
.
.
.
.
.
#Shedelectrique #builtup #gremlins
20 1 23 hours ago
Well, hello there.
.
.
.
.
.
.
.
.
.
.
#Shedelectrique #distortionpedal #trianglemuffclone #wherethefuckismypowercable
10 0 15 February, 2018
@shedification Profile picture

@shedification

The #case has arrived so it's time to measure, drill, and test assemble.
.
.
.
.
.
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #mammothelectronics #drillbabydrill

The #case has arrived so it's time to measure, drill, and test assemble.
.
.
.
.
.
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #mammothelectronics #drillbabydrill
8 0 15 February, 2018
@shedification Profile picture

@shedification

I didn't want to use a standard LED so I went with this instead, this is 6 #smdleds in a ring under an epoxy diffuser. Much cooler look.
.
.
.
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #litaf #leds #greenlight #trianglemuffclone

I didn't want to use a standard LED so I went with this instead, this is 6 #smdleds in a ring under an epoxy diffuser. Much cooler look.
.
.
.
.
.
.
.
.
#Shedelectrique #buildit #distortionpedal #litaf #leds #greenlight #trianglemuffclone
22 3 15 February, 2018
@shedification Profile picture

@shedification

Parts shipment day is the first most fun day of a new build. #itshere #buildit #Shedelectrique

Parts shipment day is the first most fun day of a new build. #itshere #buildit #Shedelectrique
10 2 12 February, 2018
@shedification Profile picture

@shedification

I'm having to wait for parts for the current guitar project so I decided to do the physical layout for the next #distortionpedal I'm building. This will utilize some fun new parts some fun really old parts and should roar pretty beautifully when I'm finished up. I'll document the project here as I go. I'm beyond psyched to start. #Shedelectrique #buildit #newoldstock #effectspedals

I'm having to wait for parts for the current guitar project so I decided to do the physical layout for the next #distortionpedal I'm building. This will utilize some fun new parts some fun really old parts and should roar pretty beautifully when I'm finished up. I'll document the project here as I go. I'm beyond psyched to start. #Shedelectrique #buildit #newoldstock #effectspedals
16 2 8 February, 2018

Top #shedelectrique posts